Description

Glock 22 Gen 5 MOS OEM Slide

The Glock 22 Gen 5 MOS OEM Slide is a factory-original, optic-ready component built specifically for the Glock 22 Gen 5 platform. Because Glock machines this slide to original specifications and cuts it for the Modular Optic System, it delivers consistent fit, smooth cycling, and a direct path to running a red dot on the full size .40.

Moreover, this Glock 22 MOS slide suits shooters who run the .40 and want OEM performance with a mounted optic and no aftermarket milling. As a result, this optic ready Glock 22 slide works well for duty use, range work, and modern red dot builds.

What Makes This an OEM Glock Slide

An OEM Glock slide comes directly from Glock’s original manufacturing process. Glock machines each slide from high-quality steel, applies the durable nDLC finish, and cuts the MOS optic recess to factory standards.

Therefore, the slide installs cleanly on a compatible Gen 5 frame and accepts a red dot through the factory plate system. In contrast, many aftermarket optic-ready slides rely on third-party cuts with variable tolerances.

What Is MOS and Why It Matters

MOS stands for Modular Optic System, Glock’s factory method for mounting a red dot without milling the slide.

• The slide ships with a cover plate over a milled optic recess
• You swap the cover plate for an adapter plate that matches your optic footprint
• The optic mounts to the plate, and the plate mounts to the slide

As a result, you keep the factory slide, avoid custom machining, and can change optics later by changing the plate.

What Sets the Gen 5 22 MOS Slide Apart

The Gen 5 22 is the fifth generation full size .40, and this slide is cut for optics, so it carries the current Glock upgrades.

• The factory MOS optic cut for a red dot with no milling
• Chambered in .40 S&W, with the wider .40 breech face
• Front serrations for an added tactile surface during press checks and manipulations
• Factory nDLC finish for strong corrosion and wear resistance

Available Configurations

This slide is available in two configurations to support different build goals.

• Complete configuration: Installs immediately with factory internals and the MOS plate system
• Stripped configuration: Supports controlled or custom builds while keeping the factory MOS cut

As a result, buyers can choose convenience or flexibility while keeping OEM quality intact.

What’s Included For Glock 22 Gen 5 MOS OEM

Complete Slide Components

• OEM slide body with factory MOS optic cut
• MOS cover plate installed
• MOS adapter plate set
• OEM barrel (Glock Marksman Barrel, GMB, .40 S&W, 4.49 in)
• Recoil spring assembly (Gen 5)
• Firing pin (striker) assembly
• Firing pin safety
• Extractor (.40 breech face)
• Depressor plunger assembly
• Rear slide plate
• Channel liner
• OEM Glock sights

Stripped Slide Components

• OEM slide body with factory MOS optic cut
• MOS cover plate installed
• Channel liner
• OEM Glock sights

Note: The stripped option excludes the barrel, recoil spring assembly, and upper internal parts.

Specifications

Compatibility & Fitment

This slide fits Glock 22 Gen 5 frames. Glock designed the slide around the full size Gen 5 frame, the Gen 5 locking block, and factory rail geometry, chambered for .40 S&W. The MOS optic cut lives on the slide.

However, it does not fit Gen 3 or Gen 4 frames, which use a different recoil setup. It is chambered in .40 S&W, so it is not a 9mm slide. Therefore, buyers should confirm model, generation, and caliber before ordering.

Optic fit depends on your red dot footprint and the matching MOS plate. Confirm your optic footprint against the plate before mounting.

Installation Expectations

The complete slide installs as a true drop-in replacement when paired with a compatible Gen 5 frame set up for the 22. No fitting or modification is required. To mount a red dot, remove the cover plate, install the adapter plate that matches your optic, then seat the optic.

Meanwhile, the stripped version accepts standard Glock Gen 5 .40 upper internals using common armorer tools. After assembly, perform a full function check before live fire.

Finish & Durability

Glock applies its factory nDLC finish to this slide to increase surface hardness and reduce friction during cycling. Additionally, the coating resists corrosion, scratches, and wear.

As a result, the slide performs reliably under extended duty and range use, even with an optic mounted.

Customization Options For Glock 22 Gen 5 MOS OEM

Although Glock builds this slide to factory specifications, users can still tailor it to their setup.

• Mount a red dot using the matching MOS adapter plate
• Install suppressor height or co-witness sights
• Add night sights or fiber optics
• Apply Cerakote or custom coatings

However, permanent modifications may affect factory warranty coverage.

Frequently Asked Questions

Do I need to mill the slide to add an optic? No. The MOS cut is already there. You mount the optic on an adapter plate, so no machining is required.

Will this slide fit a Gen 3 or Gen 4 Glock 22? No. Glock engineered this slide for Gen 5 frames, which use a different recoil and frame setup.

Is this a 9mm slide? No. The Glock 22 is chambered in .40 S&W, so this is a .40 slide with the wider .40 breech face.

Which optics fit the MOS slide? Fit depends on your optic footprint and the matching MOS plate. Confirm your footprint against the plate before mounting.

Important Notice

This product is an OEM-compatible Glock component. We operate independently and do not affiliate with Glock, Inc. or Glock Ges.m.b.H. “GLOCK” is a registered trademark used only to identify compatibility.